SMA 50 - BER | BPV

The booster and spring technology combined with the four-blade cutter head system allows for large weld bevels up to 20mm.

Maximum chamfer width [mm]
0 - 20
Radius [mm]
1,2 | 2 | 2,5 | 3 | 4 | 6 | 8
Chamfer angle
0° - 80°

Price on request


SMA 50 - BER | BPV

* Mandatory fields

The SMA 50-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 20 mm is possible in NE metals and a chamfer width of up to 15mm in steel. In addition to this, a radius processing of 1.2mm to 8mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The cutter heads are available for chamfer angles between 0 - 80°.
The processing of drill holes is already possible starting at a diameter of >28mm.


  •     Booster technology for a higher material removal rate
  •     Spring technology for higher service life of cutting inserts
  •     Processing chamfers, radii on sheets, containers, inner and outer edges, contours and drill holes
  •     Replaceable cutter head for different chamfer angles 0 - 80°
  •     Easy and vibration-free work
  •     Up to 16-times usable turning cutting plates
  •     Optionally available joint arm for ergonomic work
  •     Optimal for attachment of radii for painting treatment, coatings and corrosion protection
Technical dataSMA 50 - BEVSMA 50 - BPV
Motor2 kW | 6.600 rpm2 kW | 6.600 rpm
Energy230 V, 50/60 Hz2.400 l/min | 6-7 bar
Maximum chamfer width20 mm20 mm
Guide ball bearingmin. Ø 26,3 mmmin. Ø 26,3 mm
Cutter head0° - 60°0° - 60°
Weight10 kg10 kg
Item No.6973371479