The SMA 30-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 8 mm is possible in NE metals and a chamfer width of up to 6mm in steel. In addition to this, a radius processing of 1.2mm to 6mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 30 is equipped with a speed control and should be preferably used for stainless steel processing.
The cutter heads are available for chamfer angles 30°, 45° and 60°.
The processing of drill holes is already possible starting at a diameter of >28mm.
For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.
|Technical data||SMA 30 - BER||SMA 30 - BPV|
|Motor||1,5 kW | 2.500 - 7.900 rpm||1,04 kW | 12.000 rpm|
|Energy||230 V, 50/60 Hz||1.200 l/min | 6-7 bar|
|Maximum chamfer width||6 mm||6 mm|
|Guide ball bearing||min. Ø 26,3 mm||min. Ø 26,3 mm|
|Cutter head||30° / 45° / 60°||30° / 45° / 60°|
|Weight||3,5 kg||3,0 kg|