Contour machining

The metal and plastic world demands a high surface quality.

The hand-held and stationary contour and deburring machines from Assfalg can be used for a post-processing of sharp-edged contours and burr formation after the manufacturing process.

We offer a wide range of machines for both standard solutions and individual solutions, depending on the type and thickness of the material.


Chamfer width: 0 - 1 mm
Radius: 1,0 mm
Chamfer angle: 45°

Chamfer width: 0 - 2 mm
Radius: 1 | 2 mm
Chamfer angle: 45°

Chamfer width: 0 - 3 mm
Radius: 2 | 3 | 4 mm
Chamfer angle: 15 - 45°

Chamfer width: 0 - 2 mm
Radius: 2 | 3 | 4 mm
Chamfer angle: 15 - 45°

Chamfer width: 0 - 4 mm
Radius: 1,25 | 2,5 mm
Chamfer angle: 45°

Fasenbreite: 0 - 6 mm
Radius: 1,2 | 2 | 2,5 | 3 | 4 | 6 mm
Fasenwinkel: 30° | 45° | 60°

Chamfer width: 0 - 15 mm
Radius: 1,2 | 2 | 2,5 | 3 | 4 | 6 | 8 mm
Chamfer angle: 0 - 80°

Chamfer width: 0 - 20 mm
Radius: 1,2 | 2 | 2,5 | 3 | 4 | 6 | 8 mm
Chamfer angle: 0 - 60°

Chamfer width: 0 - 30 mm
Radius: 1,2 | 2 | 2,5 | 3 | 4 | 6 | 8 | 10 | 12 | 15 mm
Chamfer angle: 0 - 80°

Chamfer width: 0 - 2 mm
Radius: 0,2 – 1,5 mm
Chamfer angle: 0 - 90°

Chamfer width: 0 - 3 mm
Radius: 0,2 - 3 mm
Chamfer angle: 0 - 90°

Chamfer width: 0 - 3 mm
Radius: 0,2 - 3 mm
Chamfer angle: 0 - 90°

Chamfer width: 0 - 4 mm
Radius: 1 – 6 mm
Chamfer angle: 0 - 90°

Chamfer width: 0 - 5 mm
Radius: 1 - 6 mm
Chamfer angle: 15 - 90°